Accessories

Spectrum X-Ray offers quality X-Ray accessories at competitive prices. Whether you need lead gloves or lead aprons we have the product for your facility. We are a leading supplier of X-Ray accessories throughout the region and support our customers with the utmost customer service. We sell hundreds of X-Ray accessory products, call us to find out if we have what you are looking for.

JPI Techno Aide
Clinton Electronics Dunlee

X-Ray_Catalog

X-Ray Accessories


Spectrum Medical X-Ray offers a wide range of quality X-Ray accessories at competitive prices. As a leading supplier of X-Ray accessories, chances are we have the product you're looking for. If you don't find it on this site, contact our office.

  • Cassettes & Screens
  • X-Ray Tape
  • Sensitometers
  • Densitometers
  • Marking Pens
  • Left & Right Clips
  • Illuminators
  • Calipers
  • Lead Gloves
  • Lead Aprons
  • Filing Envelopes
  • Mailing envelopes
  • Protective apparel
  • Foam Wedges
  • and much, much more.........

X-Rite Portable Transmission Densitometer



Sensitometers and densitometers work in tandem. Sensitometers imprint a standard set of exposures on a photographic or x-ray film sample. When the film sample is developed, a densitometer is used to read the optical density of the exposures and chart a profile against a known set of standards. This profile alerts you to fluctuations in processing conditions and allows you to take corrective action.

The Portable Transmission Densitometer is designed for black and white film measurement applications where portability is required. Self-contained light table accommodates film up to 11 inches wide. Features the same accuracy and repeatability as larger counter top units.

  • EnergyStar compliant
  • Measuring area: 1 & 2 mm
  • Measuring length: 5.5 inches
  • Measuring range: 0-3.5D (1mm) 0-4.0D (2mm)
  • Scale factor (slope) stability: ±1% per 6 months
  • NiMH battery that delivers greater than 2,000 measurements per battery charge
  • "Sleep" mode powers down the instrument when not in use to conserve battery power
  • Designed and manufactured to comply with Title 17, Section 30255-30308 QA Regulations
  • X-Rite Dual-Color Sensitometer



    Sensitometers and densitometers work in tandem. Sensitometers imprint a standard set of exposures on a photographic or x-ray film sample. When the film sample is developed, a densitometer is used to read the optical density of the exposures and chart a profile against a known set of standards. This profile alerts you to fluctuations in processing conditions and allows you to take corrective action.

    The Dual-Color Sensitometer is a battery operated, dual color, single sided exposure sensitometer, designed for quality control of cine and X-Ray processing systems. It produces repeatable 21 step exposures on applicable film with approximately 10,000 exposures per battery. Its ease of operation enables anyone with little instruction to expose repeatable sensitomerty strips, with either blue or green exposing light—simulating the light from blue and green intensifying screens. Advanced low-power circuitry allows a long battery life without sacrificing performance.

  • Exposure stability: ±.02 log exposure per year
  • Unit-to-unit repeatability: ±.02 log exposure
  • Light modulation: 21-step wedge, 0.15D per step
  • Blue color peak wavelength: 455nm ± 10nm
  • Green color peak wavelength: 512nm ± 10nm
  • Power requirement: 9 volt alkaline battery (included) approx. 10,000 exposures/battery
  • Designed and manufactured to comply with Title 17, Section 30255-30308 QA Regulations
  • Portable Grids


    Our X-Ray grids are offered in 85, 103, 178, or 200 lines-per-inch (LPI) configurations. The manufacturer of your X-Ray equipment can provide you with guidelines for the X-Ray grid specifications that best suits your system.

    Typically, CR systems should use 178 lines-per-inch or higher.

    Stationary and Bucky Grids


    Determine the grid size you need. Typically, table bucky or wall bucky grids will be 17 1/4" x 18 7/8" or 18" x 18".

    Grid Caddy


    • Provides quick access to grids during portable exams, increasing grid use.
    • Provides safe storage place for grids when not in use.
    • Eliminates the need for one technologist to physically carry the grid while another pushes the portable machine.
    • Decreases damage to grids due to improper handling during transport.
    • Fewer artifacts on X-Ray images
    • Decreases expense of replacement grids
    • Easily attaches to one or both sides of machine with no drilling required

    DR and CR Weight Bearing Protectors

     

    • Panel Protectors come in all Standard DR Panel and CR cassette sizes
    • Weight capacities: For CR Cassettes – 275 & 450 lb (125 & 204 kg); For DR Panels – 500 lb (227 kg)
    • X-ray lucent faceplate allows X-rays to passthrough the Panel Protector with no significant absorption or scattering
    • Keeps patient’s foot as close to the target imageplate as possible, ensuring high quality images with no significant magnification
    • Non-slip rubber grips keep the Panel Protectorsecurely in place on a hard, smooth floor
    • Easy to keep clean, the Panel Protector ismade from germ-resistant, non-porouspolyethylene, polycarbonate, and stainless steel

    Step Platforms

     

    1-Step Platform:

    • Height: 8 in / 20 cm
    • Width: 20 in / 51 cm
    • Length: 20 in / 51 cm
    • Handle height: 45 in. / 114 cm

    2-Step Platform:

    • Height: 16 in / 41 cm
    • Width: 19.5 in / 50 cm
    • Length: 17 in / 43 cm
    • Handle height: 51 in. / 130 cm

    3-Step Platform:

    • Height: 24 in / 41 cm
    • Width: 19.5 in / 50 cm
    • Length: 17 in / 43 cm
    • Handle height: 59 in / 150 cm
    • Extra side rail included