We offer a wide array of Contrast Delivery products including Contrast Injectors, Syringes for CT & MR, Disposable Contrast Syringes, and Transfer & Extension Sets.

![]() |
![]() |
|
![]() |
![]() |
We offer a wide array of Contrast Delivery products including Contrast Injectors, Syringes for CT & MR, Disposable Contrast Syringes, and Transfer & Extension Sets.
![]() |
![]() |
|
![]() |
![]() |
Designed for MRI procedures, this contrast media power injector offers battery free operation using a color touch screen technology. Simple to use programmable user interface with user defined stored settings. Dual injection channels allow for both contrast and saline flush utilizing the UltraJect pre-filled syringes.
Designed for CT procedures, this contrast delivery system features the industry's only fully programmable power-head, allowing technologists to stay with their patients throughout injection preparation; providing enhanced ease, convenience, speed and patient side safety. Its unique, user-friendly LCD power-head is fully programmable at the remote console, allowing technologists to change protocols, perform saline injections, fill syringes and much more with just the touch of a button. Special safety features include Tilt Enable, which allows an injection to occur if the proper sequence has been followed and the power-head is tilted downward to reduce the risk of embolism. The injection system accommodates both 200 mL disposable and 125 mL Ultraject prefilled syringes, with easy front loading and removal.
Optistar Elite injector gives you the option of operating from the powerhead or the control console. The console features a color LCD touch screen that makes operation easy, with simple, intuitive commands and status screens. It may help make delivery safer too, with built-in status alerts, a Patency Check™ feature and Timing Bolus™ injection. Paired with Ultraject™ prefilled syringes, Optistar Elite injector helps you save time preparing for MR contrast delivery. This enables you to spend more time with your patients.
The user-defined functionality of the Angiomat Illumena contrast delivery system sets the standard for efficiency and ease of use. With one touch you can switch between cardio, angio and CT modes. This system’s remarkable versatility expands your ability to deliver advanced patient care across an increasingly broad spectrum of patients and procedures. The 150 mL Angiomat Illumena syringe line includes convenient packaging to fit your procedure type. An individual 150 mL syringe is available, allowing you to choose the length of high pressure tubing. Two CT multipack options include one 150 mL syringe and one 60" low pressure coiled tubing with a choice of the standard luer or Linden luer.
Features ease-of-use and reliability:
Intelligent, Intuitive, Innovative. Available with either the Classic monitor or the Certegra® Workstation. Designed to increase efficiency with:
Cat No. | Description |
601590 | 50 x 200mL CT Multipak Frontload MEDRAD / Box |
601370 | 50 x 200mL CT Multipak MEDRAD w/Handifil & Coiled Tubing / Box |
601193 | 50 x 150mL CT Multipak w/Handifil and Coiled Tubing / Box |
800099 | 50 x 200mL CT Multipak w/Handifil and Coiled Tubing / Box |
800096 | 50 x 200mL Front Loading Syringe w/Handifil / Box |
302050 | 100 x Handifil / Box |
600169 | 50 x 260mL L-F Syringe w/ Handifil / Box |
600269 | 50 x 150mL LF Syringe w/Handifil / Box |
302850 | 50 x 100mL Liebel-Flarsheim Syringe / Box |
601194 | 50 x 260mL Multipak w/Handifil & Coil Tubing / Box |
601360 | 50 x 150mL Syringe w/ Handifil for Medrad Injectors / Box |
601350 | 50 x 200mL Syringe w/ Handifil for Medrad Injectors / Box |
302100 | 50 x 100mL Syringe w/Handifil / Box |
600172 | 50 x 130mL Syringe w/Handifil / Box |
Cat No. | Description |
801106 | 100 x 60 Coiled Y-Tubing / Box |
801107 | 100 x 90 Coiled Y-Tubing / Box |
801020 | 50 x 1x60mL/1x25mL/60" Y MR Multi-Pak / Box |
801021 | 50 x 1x60mL/1x25mL/90" Y MR Multi-Pak / Box |
801018 | 50 x 2x60 mL/60" Y Tubing MR Multi-Pak / Box |
801019 | 50 x 2x60 mL/90" Y Tubing MR Multi-Pak / Box |
801103 | 100 x 25mL MR Syringes / Box |
801104 | 50 x 60mL MR Syringes / Box |
Cat No. | Description |
801106 | 100 x 60- Coiled Tubing / Case |
801107 | 100 x 90 - Coiled Tubing / Case |
801801 | 50 x 60mL LE 60 mL Syringe / Case |
801800 | 50 x 2-60mL Syr/90" Y Tub LE Multipack / Case |
Cat No. | Description |
844021 | 20 x 1 x 200 mL Syringe w/60" Y-Tubing and dual check valve / Case |
844023 | 20 x 2 x 200 mL Syringe w/60" Y-Tubing and dual check valve / Case |
844020 | 20 x 1 x 200 mL Syringe w/60" Y-Tubing and no check valve / Case |
844022 | 50 x 2 x 200 mL Syringe w/60" Y-Tubing and no check valve / Case |
844015 | 50 x 1 x 200 mL Syringe w/60" Y-Tubing and single check valve / Case |
844016 | 50 x 2 x 200 mL Syringe w/60" Y-Tubing and single check valve / Case |
810551 | 50 x Transfer Set / Case |
844012 | 50 x 60"Y-Tubing w/dual check valve / Case |
844010 | 50 x 60"Y-Tubing w/no check valve / Case |
844011 | 50 x 60"Y-Tubing w/single check valve / Case |
Cat No. | Vol | Description |
60 -FT-Q | 60 ml | Syringe with Quick Fill |
60 -FT | 60 ml | Discontinued 9/1/01, Replace with 60-FT-Q |
150-FT-Q | 150 ml | Syringe with Quick Fill |
150-FT | 150 ml | Syringe Alone |
200-FT-Q | 200 ml | Syringe with Quick Fill |
200-FT | 200 ml | Syringe Alone |
Cat No. | Vol | Description |
150-FT-Q | 150 ml | Syringe with Quick Fill Tube |
150-FT | 150 ml | Syringe Alone |
200-FT-Q | 200 ml | Syringe with Quick Fill Tube |
200-FT | 200 ml | Syringe Alone |
Cat No. | Vol | Description |
SDS-CTP-QFT | 200 ml | Stellant Dual Syringe Kit, low-pressure tubing with T-connector and 1 Quick Fill Tube |
SDS-CTP-SPK | 200 ml | Stellant Dual Syringe Kit, low-pressure tubing with T-connector and 2 short sterile spikes |
SSS-CTP-QFT | 200 ml | Stellant Single Syringe, low-pressure tubing and 1 Quick Fill tube |
SSS-CTP-SPK | 200 ml | Stellant Single Syringe, low-pressure tubing and 1 sterile spike |
SSS-QFT | 200 ml | Stellant Single Syringe with Quick Fill Tube |
Cat No. | Vol | Description |
125-FLS | 125 ml | Discontinued 9/1/01, Replace with 125-FLS-Q or CTP-125-FLS |
125-FLS-Q | 125 ml | Syringe with Quick Fill Tube |
CTP-125-FLS | 125 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
200-FLS-Q | 200 ml | Syringe with Quick Fill Tube |
200-FLS | 200 ml | Syringe Alone |
CTP-200-FLS | 200 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
Cat No. | Vol | Description |
125-FLS | 125 ml | Discontinued 9/1/01, Replace with 125-FLS-Q or CTP-125-FLS |
125-FLS-Q | 125 ml | Syringe with Quick Fill Tube |
CTP-125-FLS | 125 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
200-FLS-Q | 200 ml | Syringe with Quick Fill Tube |
200-FLS | 200 ml | Syringe Alone |
CTP-200-FLS | 200 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
Cat No. | Vol | Description |
200-FLS-Q | 200 ml | Syringe with Quick Fill Tube |
200-FLS | 200 ml | Syringe Alone |
CTP-200-FLS | 200 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
Cat No. | Vol | Description |
200-FT-Q | 200 ml | Syringe with Quick Fill Tube |
200-FT | 200 ml | Syringe Alone |
CTP 100 | 200 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
Cat No. | Vol | Description |
130 AML-P-Q | 130 ml | Discontinued 3/1/04-Replace with DSK 130-Q |
DSK 130-Q | 130 ml | Syringe with Quick Fill Tube |
DSK 130 | 130 ml | Discontinued 3/1/04-Replace with DSK 130-Q |
Cat No. | Vol | Description |
100-FT-A-Q | 100 ml | Syringe with Quick Fill Tube |
100-FT-A | 100 ml | Syringe Alone |
Cat No. | Vol | Description |
150-FT-A-Q | 150 ml | Syringe with Quick Fill Tube |
CTP-150-A | 150 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
260-FT-Q | 260 ml | Syringe with Quick Fill Tube |
CTP-260 | 260 ml | Syringe with Quick Fill Tube & 60" Low Pressure Tubing |
Cat No. | Vol | Description |
SSQK 65 /115vs |
65 ml 115 ml |
115ml Qwik-Fit Syringe syringe for saline, 65ml Qwik-Fit Syringe syringe for contrast, 1 large spike, 1 small spike, 96" low pressure connector tube with T-connector and check valve |
Cat No. | Vol | Description |
SQK 65 | 65 ml | Discontinued 9/1/01, Replace with SQK 65s |
SQK 65s | 65 ml | 2 (65) ml Front Load syringes, 96" low pressure tubing without an integrated check valve, 1 large spike for loading saline and 1 small spike for loading contrast |
SQK 65v | 65 ml | Discontinued 9/1/01, Replace with SQK 65vs |
SQK 65vs | 65 ml | 2 (65) ml Front Load syringes, 96" low pressure tubing with an integrated check valve, 1 large spike for loading saline, and 1 small spike for loading contrast. |
Catalog Number: C853-0211
Units/Case: 50
CT-Pack includes 200ml syringe, fill tube and 60" low pressure extension set. Fits Medrad MCT and MCT Plus and Liebel-Flarsheim CT 9000 injectors. (Adapter kits required.)
Catalog Number: C405-3208
Units/case: 100
Sterile transfer sets with various designs to fill syringes from multiple sizes and styles of containers.
Cat No. | Vol | Description |
100101 | 200 ml | 200ml syringe, quick fill tube and 150cm coiled low pressure extension set. Fits Medrad MCT, MCT Plus, Vistron CT, and Envision CT injectors |
200101 | 200 ml | 200ml syringe, quick fill tube and 150cm coiled low pressure extension set. Fits Liebel Flarsheim CT 9000 and CT 9000 ADV injectors |
400101 | 200 ml | 200ml syringe, quick fill tube and 150cm coiled low pressure extension set. Fits EZEM EMPOWER CT injectors |
Cat No. | Vol | Description |
100301 | 200 ml | 200ml syringe, quick fill tube and 150cm coiled low pressure extension set. Fits Medrad MCT, MCT Plus, Vistron CT, and Envision CT injectors |
100302 | 200 ml | 200ml syringe, quick fill tube and 150cm coiled low pressure extension set. Fits Liebel Flarsheim CT 9000 and CT 9000 ADV injectors |
200301 | 200 ml | 200ml syringe, quick fill tube and 150cm coiled low pressure extension set. Fits EZEM EMPOWER CT injectors |
Catalog Number: C405-0060
Units/case: 100
Sterile, Clear, Flexible, Straight and Coiled Low Pressure Extension Line, designed for use with multiple connections, including needle-less valves, to help prevent sticking, breaking and over-tightening; and to withstand pressures obtained during CT procedures 300 PSI rated check valves.
Optibolus bolus shaping software helps you control flow rate, allowing you to manage your contrast media injection while helping to potentially increase contrast media utility. Mallinckrodt’s Optivantage™ dual-head CT contrast delivery system with the optional Optibolus software precisely controls contrast media. By increasing the value of the contrast, it helps you optimize confidence in patient care. Key Benefits: